5894307-UIM-B-0920
Johnson Controls Ducted Systems 31
SECTION XI: REPLACEMENT PARTS LIST
DESCRIPTION
MOTOR
BLOWER, COMBUSTION
MOTOR, DIRECT DRIVE BLOWER
ELECTRICAL
CONTROL, FURNACE
CONTROL, TEMPERATURE
IGNITER
SENSOR, FLAME
SWITCH, DOOR
SWITCH, LIMIT
SENSOR, PRESSURE
TRANSFORMER
VALVE, GAS
AIR MOVING
HOUSING, BLOWER
WHEEL, BLOWER
FABRICATED PARTS
BRACKET, BLOWER TRACK (2 required)
BURNER, MAIN GAS
HEAT EXCHANGER ASSEMBLY
PANEL, BLOCKOFF
PAN, BOTTOM
PANEL, DOOR (2 required)
FABRICATED PARTS Continued
PANEL, TOP
RAIL, BLOWER (2 required)
SHELF, BLOWER
MISCELLANEOUS
BAG, PARTS
BRACKET, DOOR
DIAGRAM, WIRING
FERRULE (3 required)
GASKET, FOAM (Door) (1.5 ft required)
GROMMET (3 required)
HARNESS, WIRING
HOSE, CONDENSATE
HOSE, RAIN GUTTER
KNOB, QUARTER TURN (4 required)
MOTOR MOUNT
ORIFICE, BURNER
PAN, CONDENSATE
PLUG, SEAL, 7/8 in.
PLUG, SEAL, 2-3/8 in.
PLUG, VENT PIPE
SIGHT GLASS, OVAL (2 required)
TUBING, SILICON
DESCRIPTION
REPLACEMENT PART CONTACT INFORMATION
This is a generic parts list. To request a complete parts list, see the contact information below.
Visit our website at www.source1parts.com to do the following:
• Search for a part or browse the catalog.
• Find a dealer or distributor.
• Access customer service contact information as follows.
a. Click the Brand Links button.
b. Click the Customer Service button.
You can contact us by mail. Just send a written request to the following address:
Johnson Controls Ducted Systems
Consumer Relations
5005 York Drive
Norman, OK 73069
To Next Page
Loading...
Need help?
General
