Yudian AI Series User Manual

CONTENTS
1. SUMMARY .............................................................................................................................................................. 1
1.1 MAIN FEATURES 1
1.2 ORDERING CODE DEFINITION 1
1.3 MODULES 3
New advanced module technology 4
1.4 MENTINANCE 4
2. TECHNICAL SPECIFICATION ........................................................................................................................... 4
3. REAR TERMINAL LAYOUT AND WIRING ...................................................................................................... 6
4. DISPLAYS AND OPERATIONS ............................................................................................................................ 8
FRONT PANEL DESCRIPTION 8
4.1 DISPLAY STATUS 8
4.2 OPERATION DESCRIPTION 9
4.2.1 Display status switch 9
4.2.2 Set Value Setting 9
4.2.3 Parameter Setting 9
4.4 PROGRAM OPERATION (FOR AI-518P ONLY) 11
4.4.1 Setup program 11
4.4.2 Run/Hold 11
4.4.3 StoP 11
4.4.4 Display and modify the running StEP 11
5. PARAMETERS AND SETTINGS........................................................................................................................ 12
5.1 THE FULL PARAMETER TABLE 12
5.2 ADDITIONAL REMARKS OF SPECIAL FUNCTIONS 18
5.2.4 Alarm blocking at the beginning of power on(CF.B=1). 19
5.2.5 Sectional power restriction(CF.E=1). 19
6. WIDELY USED CONTROL MODE ................................................................................................................... 20
6.1 ON/OFF CONTROL/ ALARMING INSTRUMENTS 20
6.2 TEMPERATURE TRAMSMISSION/ PROGRAM GIVE GERNATOR 20
6.3 AI ARTIFICIAL INTELLIGENT REGULATOR 21
7. FURTHER DESCRIPTION FOR THE OPERATION OF AI-518P SERIES INSTRUMENT ...................... 21
7.1 CONCEPTS AND FUNCTIONS 21
7.2 PROGRAMMING AND OPERATION EDITTING 22

Yudian AI Series Specifications

General

Brand	Yudian
Model	AI Series
Category	Temperature Controller
Language	English