Shenzhen Yunmi Intelligent Technology Co., Ltd
Folding process:
1. Press the button on the rod to lower the handle first.
2. Pull out the outer ring and folding the handle.
3-4. Press the Folding button under the seat. Release the folding lock on the pedal, then folding the seat.(optional)
5-6. Pull out the folding lock first. And then Press white button as the picture shows. Set down the rod when the
button locked again.
Opening process:
Press the white button and set up the rod. Push in the safety lock and follow the steps against folding. ( Make sure
the safety lock is settled tightly, otherwise it will influence your safety when you are riding.)
Notice: because of the product upgrade, there may be some difference between the product actually get and the
instruction manual. Not affecting the normal usage
To Next Page
Loading...
Need help?
General
