Shenzhen Yunmi Intelligent Technology Co., Ltd
1. Check whether battery gets power or not.
2. Open the foot pedal and check whether the battery fuse is not inserted or has been burnt out.
3. Open the pedal to check whether the connector between main line of accelerator and controller is plugged in or
not.
4. Open pedal to check whether the connector between battery and controller is plugged in or not.
Battery cannot be charged
1. Connect the charger to scooter and charging socket to check whether the indicator light will be on or not.
2. Open the foot pedal and check whether the battery fuse is not inserted or has been burnt out.
Scooter cannot accelerate.
1. Confirm whether the brake lever is rebounded to original position or not.
2. Open the foot pedal and check whether the connector between the controller and the motor is plugged in
If actions above have been completed, but the product still does not operate normally. Please contact us.
Warranty Coverage
If product has the following problems within warranty period, the product distributor will provide a complete
after-sales service within the scope of the quality guarantee.
Attention: to ensure your safety during use, do not disassemble or modify product.
This will cause some unpredictable security risks. Products that are disassembled or modified without permission will
not be able to enjoy free warranty service.
Within the warranty period, failure or damage caused by the following causes is not within the scope of quality
assurance:
1. Not properly maintained in accordance with this
Malfunction in normal use
Malfunction(Not caused by
impact or external force)
Malfunction in normal use
Cannot charge or range is too
short after charging
Distorted or broken in normal
use
To Next Page
Loading...
Need help?
General
