Zanussi ZIT64X User Manual

Locking / unlocking the control panel
You can lock the control panel, but not . It prevents
an accidental change of the heat setting during a cooking
session.
Touch the symbol
. The symbol comes on for 4
seconds.
The Timer still operates.
Touch the symbol
to switch off this function. The heat
setting that you set before comes on.
When you switch off the appliance, you also switch off
this function.
The child safety device
This function prevents an accidental operation of the hob.
Starting the child safety device
•
Start the hob with
. Do not set the heat settings .
•
Touch
until the acoustic signal. . The symbol
comes on. Switch off the appliance.
Switching off the child safety device
•
Start the hob with
. comes on. Touch until
the acoustic signal.
comes on
• Switch off the appliance.
Overriding the child safety device for one cooking session
•
Start the hob with
. The symbol comes on.
•
Touch
until the acoustic signal. The symbol
comes on. Set the heat setting in less than 10 sec-
onds. You can operate the hob. When you stop the hob
with
, the child safety device operates again.
Helpful hints and tips
Cookware for induction cooking zones
Important! In induction cooking a powerful
electromagnetic field generates an almost instant heat
inside the cookware.
Cookware material
• correct: cast iron, steel, enamelled steel, stainless
steel, a multi-layer bottom (marked as correct by a
manufacturer).
• not correct: aluminium, copper, brass, glass, ceramic,
porcelain.
Cookware is correct for an induction hob if …
• ... some water boils very quickly on a zone set to the
highest heat setting..
• ... a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick and
flat as possible.
Cookware dimensions : induction cooking zones adapt to
the dimension of the bottom of the cookware automatically
to some limit. But, the magnetic part of the bottom of the
cookware must have a minimum diameter of approxi-
mately 3/4 of the cooking zones.
Operating noises
If you can hear
• cracking noise: cookware is made of different materials
(Sandwich construction).
• whistling: you use one or more cooking zones with
high power levels and the cookware is made of different
materials (Sandwich construction).
• humming: you use high power levels.
• clicking: electric switching occurs.
• hissing, buzzing: the fan operates.
The noises are normal and do not refer to any defects.
Energy saving
• If possible, always put the lids on the cookware.
• Put cookware on a cooking zone before you start
it.
Examples of cooking applications
The data in the table is for guidance only.
8

Zanussi ZIT64X Specifications

General

Hob type	Zone induction hob
Top surface type	Ceramic
Appliance placement	Built-in
Cooking zone 2 type	Large
Cooking zone 3 type	Regular
Cooking zone 4 type	Simmer
Cooking zone 2 boost	3400 W
Cooking zone 2 power	2300 W
Cooking zone 2 shape	Round
Cooking zone 3 power	1800 W
Cooking zone 4 boost	2500 W
Cooking zone 4 power	1400 W
Cooking zone 1 position	Left rear
Cooking zone 2 diameter	210 mm
Cooking zone 2 position	Left front
Cooking zone 3 diameter	180 mm
Cooking zone 3 position	Right rear
Cooking zone 4 diameter	145 mm
Cooking zone 4 position	Right front
Number of cooking zones	4 zone(s)
Cooking zone 1 power source	Electric
Number of gas cooking zones	0 zone(s)
Number of power levels	15
Extra large high-speed cooking zone	3700 W
Timer type	Digital
Control type	Touch
Residual heat indicator	Yes

Weight and Dimensions

Depth	490 mm
Width	560 mm
Height	55 mm