40
Fig. 6
Fig. 7
Replacing the oven light
Disconnect the appliance from its power
supply point. Push in and unscrew the glass
cap (Fig. 6). Unscrew the light bulb and
replace it with a new heat-proof bulb (300
°C) having the following features: - Operative
tension: 230 V (50 Hz); - Power: 25 W; -
Fitting: E 14. Reconnect the appliance.
The Hinged Grill
Some models are fitted with a hinged grill
element, to enable you to clean the roof of
the oven easily.
Before proceeding ensure the
oven is cool and is isolated from
the electricity supply.
! Undo the screws which hold the grill in
place (see Fig. 7). When doing this
operation for the first time, we
recommend using a screwdriver.
! Then gently pull the grill downward to
allow access to the oven roof.
! Clean the oven roof with a suitable
cleaner and wipe dry before replacing
the hinged grill element.
! Gently push up the grill element into
place and firmly screw into place the
holding nuts.
Ensure the grill holding nuts are
firmly in place to avoid the grill
falling down when in use.
To Next Page
Loading...
Need help?
General
