zapco DSP6-SL User Manual

8
The Zapco Digital Programming Network
All Digital Reference amplifiers, and the ZAPCO DSP6-SL, stand-alone
Digital Signal Processor incorporate Zapco’s exclusive Digital Programming
Network™ (DPN). This network allows the user to program all amp functions
using a DRC-SL or a PC. The amps DSP can then be programmed to
control Gain, Volume, Crossover, Q-Bass, Equalization, and even Time
Delay. More importantly, the system allows you to network all amps in your
system so you can control up to 16 amplifiers from a single DRC-SL or, with
a PC from a single window.
While the DRC-SL provides functions never before available, its small
size does limit the graphics of the network and it takes a while to make the
settings through the menu system. To allow higher resolution graphics and
to make the setting go much faster, we have also developed a program that
lets you make all adjustments with a PC. Each Digital Control product has a
USB interface. This allows you to plug a PC into any unit on the network and
control the entire network.*

zapco DSP6-SL Specifications

General

Brand	zapco
Model	DSP6-SL
Category	Computer Hardware
Language	English