Zebra DS8178 User Manual

DS8178 Digital Scanner Quick Start Guide 11
Night Mode with Vibrate
Enable Night Mode Trigger
Disable Night Mode Trigger
Toggle Night Mode
Beeper Indications
NOTE Cables may vary depending on configuration.
Indication Beeper Sequence
Power up Low/medium/high beeps
Bar code decoded Medium beep
Transmission error detected; data is ignored 4 long low beeps
Successful parameter setting High/low/high/low beeps
Correct programming sequence performed High/low beeps
Incorrect programming sequence, or Cancel bar code
scanned
Long low/long high beeps
Low battery indication (on trigger release) 4 short high beeps
Battery Indications
Battery LED status 51-100% Green, 21-50% Amber, 0-20% Red
Battery end of life 51-100% Green/red alternating
21-50% Amber/red alternating
0-20% Red blinking
Paging state Blue (fast, fast slow)

Zebra DS8178 Specifications

General

Product color	Black
Housing material	-
International Protection (IP) code	IP42
Type	Handheld bar code reader
Wavelength	617 nm
Sensor type	Photo diode
Scanner type	1D/2D
Tilt reading angle	0 - 360 °
Pitch reading angle	0 - 60 °
Optical sensor resolution	1280 pixels
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 50 °C
Operating relative humidity (H-H)	5 - 95 %
PC connection	RS-232/USB
Wireless range	100 m
Bluetooth version	4.0
Standard interfaces	USB, RS-232, Bluetooth
Connectivity technology	Wired & Wireless
Battery life	83 h
Battery capacity	2500 mAh
Power source type	Battery

Weight and Dimensions

Depth	107 mm
Width	66 mm
Height	168 mm
Weight	235.3 g