Zebra GX430t User Manual

At Gingival Level (MP Abutment) (Pages 36-40)
2322
FRIADENT
®
Prosthetics
Uncovery
At uncovery, based on indications, you can choose how to fabricate the superstructure:
• From the implant level or
•
From the gingival level (MP Abutment).
The components are selected based on the prosthetic treatment plan.
FRIADENT Tissue Punch
6
455665 –
•
D 3.0
455666 –
•
D 3.4
455660 –
•
D 3.8
455661 –
•
D 4.5
455662 –
•
D 5.5
IMPRESSIONS SINGLE CROWNS BRIDGES OVERDENTURES
FRIADENT
Transfer Coping
(Transfer Technique)
FRIADENT
Transfer Coping
(PickUp Technique)
FRIADENT MP
Impression Coping
(Transfer Technique)
FRIADENT MP
Impression Coping
(PickUp Technique)
FRIADENT MP Abutment
FRIADENT EstheticBase
Straight or Angled
FRIADENT MP Abutment
(Bridge) with Castable
or Cast-To
Waxing Sleeve
FRIADENT AuroBase
Telescopic Abutment
FRIADENT MP
Abutment (Bar) with
Gold, Titanium or
Castable Bar Coping
FRIADENT CeraBase
Telescopic Abutment
FRIADENT Attachment
FRIADENT EstheticBase
Straight or Angled
At Implant Level (Pages 26-34)
SOFT TISSUE PUNCHES
BONEPROFILER
In cases where implants are placed subcrestally, new bone may grow over the implant
during the healing phase. With the FRIALIT BoneProfiler, this bone can be removed
and the cover screw uncovered. The geometry of the FRIALIT BoneProfiler matches the
FRIADENT Gingiva Former (refer to page 40 & 41).
PROD. NO. DESCRIPTION
FRIALIT
BoneProfiler
6
455338 –
•
D 3.4
455348 –
•
D 3.8
455358 –
•
D 4.5
455368 –
•
D 5.5
455300
FRIALIT Guide Pin for BoneProfiler
FRIADENT
Trephine Drill
6
455654 –
•
D 3.4 Inside Diameter (outer diameter approximately 1.0 mm wider)
455655 –
•
D 3.8 Inside Diameter (outer diameter approximately 1.0 mm wider)
455656 –
•
D 4.5 Inside Diameter (outer diameter approximately 1.0 mm wider)
455657 –
•
D 5.5 Inside Diameter (outer diameter approximately 1.0 mm wider)
455658 –
•
D 6.5 Inside Diameter (outer diameter approximately 1.0 mm wider)
455550
FRIADENT Soft Tissue Gauge
6
FRIADENT
®
Prosthetics
for XiVE
®
Implant System

Zebra GX430t Specifications

General

Maximum resolution	300 x 300 DPI
Standard interfaces	RS-232, USB 1.1
Optional connectivity	Bluetooth
Internal memory	4 MB
Number of fonts	22
Dimensions (WxDxH)	194 x 254 x 191 mm
Minimum RAM	8 MB
Maximum label width	108 mm
Maximum label length	1 m
Product color	Black
Power requirements	100-240 VAC, 50-60 Hz

Weight and Dimensions

Depth	254 mm
Width	194 mm
Height	191 mm
Weight	2100 g