Zebra Net User Manual

Control Panel
Control Panel Menu Options
126
P1043301-005 11/21/13
Control Panel Menu Options
Control Panel (or Liquid Crystal Display—LCD) menu options only appear if a print server is
installed. The control panel parameters are somewhat different for different printers. Refer to
the user guide for your printer for specific instructions on how to modify the control panel
parameters.
Wired Network Parameters on the LCD
Table 20 identifies the wired network parameters available on your Zebra XiIIIPlus,
Z4Mplus/Z6Mplus, 105SL, PA X 4, Xi4, ZM400/ZM600, S4M, ZE500, ZT230, 105SLPlus,
ZT410, ZT420, and ZD500R printers/print engines with a print server installed.
Note • The ZT210 and ZT220 printers have the same parameters available, but do not have
control panels. Refer to the Zebra ZT210/ZT220/ZT230 User Guide for more information on
how to access these parameters.
Table 20 • Wired Network Parameters
XiIIIPlus
Z4Mplus/Z6Mplus 105SL PAX4 Xi4, 105SLPlus ZM400/ZM600 S4M ZE500 ZT230, ZT410, ZT420, ZD500R
LCD Option Details
 LIST NETWORK
The ZT230 LCD
menu will appear as:
PRINT
INFORMATION
Prints a network configuration label.
 WIRED PS CHECK? This tells if the printer searches for a
wired print server at bootup.
 PRIMARY NETWORK
The ZT230 LCD
menu will appear as:
PRIMARY PRINT
SERVER
This allows you to see if the printer
is using an IP setting from the
wireless or a wired print server at
bootup.

Zebra Net Specifications

General

Brand	Zebra
Model	Net
Category	Print Server
Language	English