Zephyr AK9234AS User Manual

13
Installation – Horizontal Ducting Preparation
7. Using a fl at head screwdriver, remove 8” round
or 3 1/4”x10” rect. knock-out plates at the back
of the insert.
9. Place top rectangular cover plate over opening
on top of the insert. NOTE: Make sure the
cover plate tabs are on top of the cover plate as
shown. From inside the insert, secure plate to
top of insert with (2) 3/16 x 3/8 screws.
A
A
B
C
C
B
8. Remove knock-outs A and B for rectangular
ducting. Remove knock outs B and C for round
ducting.
Rect.
ducting
Round
ducting
At this point, install the insert into the
At this point, install the insert into the
cabinet by following the steps on Page
cabinet by following the steps on Page
10, Step 4. After insert installation,
10, Step 4. After insert installation,
continue to page 14.
continue to page 14.

Zephyr AK9234AS Specifications

General

Color	stainless steel
Hood Type	insert
Venting Type	ducted
Number of Fan Speeds	6
Sones	6 sones
Control Type	touch pad
Interior Light	yes
Remote Control	yes
Voltage	120 volts
Current	5 amperes

Weight and Dimensions

Depth	19 3/10 inches
Height	12.00 inches
Width	34.40 inches
Net Weight	0 pounds