Zephyr AK9234AS User Manual

9
ELECTRICAL
WARNING
All Electrical work must be performed by qualifi ed electrician or person with similar technical know
how and background.
For personal safety, remove house fuse or open circuit breaker before beginning installation. Do not use
extension cord or adapter plug with this appliance.
Follow national electrical codes or prevailing local codes and ordinances.
Electrical Supply:
This appliance requires a 120V 60Hz electrical supply, and connected to an individual, properly grounded
branch circuit, protected by a 15 or 20 ampere circuit breaker or time delay fuse. Wiring must be 2 wire w/
ground. Please also refer Electrical Diagram labeled on product.
Cable Lock:
A cable locking connector (not supplied) might also be required by local codes. Check with local requirements
and codes, purchase and install appropriate connector if necessary.
Installation – Electrical
Cable Lock

Zephyr AK9234AS Specifications

General

Color	stainless steel
Hood Type	insert
Venting Type	ducted
Number of Fan Speeds	6
Sones	6 sones
Control Type	touch pad
Interior Light	yes
Remote Control	yes
Voltage	120 volts
Current	5 amperes

Weight and Dimensions

Depth	19 3/10 inches
Height	12.00 inches
Width	34.40 inches
Net Weight	0 pounds