Zephyr PRB24C01AS-OD User Manual

22
PRB24C01AS-OD Use, Care, and Installation Guide
BEVERAGE
COOLER
OUTDOOR
PRESRV™
Installation Instructions
Installing the Optional Caster Wheel Accessory
To convert the stationary unit into a mobile unit, please follow the instructions below. Installing the
optional caster wheel accessory should require at least two people to prevent injury.
Optional Caster Wheel Accessory #: PRCAST-C001
1. Empty all contents within the outdoor beverage cooler.
2. Remove the leveling legs from the outdoor beverage cooler by lifting a side of the cooler or laying
the beverage cooler on its back and twisting the leveling legs counterclockwise. Perform this step
for each leveling leg.
3. Install a caster wheel with 4 provided screws. Perform this step for each corner.
4. Set the beverage cooler back to its upright position. Place all contents back into the outdoor
beverage cooler.
F
o
C
o
R
F
o
C
o
R
1 2
3 4

Zephyr PRB24C01AS-OD Specifications

General

Brand	Zephyr
Model	PRB24C01AS-OD
Category	Accessories
Language	English