Zephyr Typhoon AK2100 User Manual

INSTALLATION
8
1. Align folded edge to cabinet base and
wall corner
2. Mark 2 hanging bolt drill locations (A) on
cabinet (see template on page 7).
4. Remove template and drill location (A)
with 1/4” or 3/8” drill bit.
5. Install EZ anchors to (B) as marked.
(see next diagram for EZ anchor
installation).
3. Mark 2 bracket drill locations (for
anchors) (B) on wall.

Zephyr Typhoon AK2100 Specifications

General

Brand	Zephyr
Model	Typhoon AK2100
Category	Ventilation Hood
Language	English