The cursor is shown in the Channel field.
ChilliNet mode
When operating in ChilliNet mode, the screen shows:
A (xx) Channel: xx
Level: xxx
The cursor is shown in the Channel field.
The area number A(xx) shows the area that the dimmer channel is assigned to and is for information only.
In both Standard and ChilliNet modes, individual channel levels can then be adjusted using the numeric keypad or
cursor keys. Press the ENT key to move between the Channel and Level fields.
The # key can be used as a quick method of setting the manual control levels to full or off. The first push will take it
100%, the second push will take it 0% etc.
Set All Channels
Standard Mode
In Standard mode, you can set a manual control level for all the channels on the dimmer in a single operation.
Select the Set All Chans option from the menu, and press the ENT key. The screen shows:
All Channels
Level: 0
ChilliNet Mode
In ChilliNet mode you can set a manual control level for all the channels in a specified area on the dimmer in a single
operation.
Select the Set All Chans option from the menu, and press the ENT key. The screen shows:
Zero 88 - Chilli Pro - Page 18 of 60 Printed: 23/03/2021 09:13:40 ES
To Next Page
Loading...
Need help?
General