Use the cursor keys to alter this setting between On and Off, to enable or disable the DMX RDM (Remote Device
Management) functionality of the Chilli Dimmer.
RDM Support
The first 5 digits of the part number are used for the Device Model ID., e.g. 01105 (0x0451) for the Chilli Pro 1210.
Supported Parameters:
DMX_START_ADDRESS,
SENSOR_DEFINITION,
SENSOR_VALUE,
DEVICE_LABEL,
MANUFACTURER_LABEL,
DEVICE_MODEL_DESCRIPTION
Sub Devices:
One per channel
Security
This option allows you to lock the dimmer, disabling all menu access. The dimmer is locked and unlocked manually by
entering a four digit code.
Global Unlock Code
There is a global unlock code which will unlock the Chilli Dimmer. If the code to unlock the dimmer has been forgotten,
contact Zero 88 or your dealer for further information.
Networked Dimmers
A networked dimmer can be locked locally as described in this section.
This will not prevent the dimmer from being controlled from a Chilli Master Controller or Chilli control panels connected
to the network.
A networked dimmer can also be locked and unlocked from a Chilli Master Controller.
Locking the Dimmer
Select the Security option from the top level options menu, and press the ENT key. The screen shows:
Zero 88 - Chilli Pro - Page 42 of 60 Printed: 23/03/2021 09:13:40 ES
To Next Page
Loading...
Need help?
General