Zhiyun CRANE 2 User Manual

9
Installing Camera
1. Loosen mounting plate thumb screw, then press and hold the safety lock while
sliding out the quick release plate (to the opposite direction of the arrow mark
on it).
2. Install the lens to quick release plate, then tighten the 1/4’’ screw at its bottom
(as shown above)
3. Slide in the quick release plate installed with the camera following the direction
of the arrow mark on camera mounting plate, then tighten the thumb screw to
finish the installation of the quick release plate.
4. Loosen the screw on lens support and adjust the support to keep the lens firm
and stabilized, then tighten the screw.
Note: Do not power on stabilizer before finishing the camera installation.
Please hold the camera stable during the whole process in case of any
malfuntioned rotation.
Installation

Zhiyun CRANE 2 Specifications

General

Battery type	AA
Operating time	18 h
Battery voltage	3.7 V
Battery capacity	6000 mAh
AC adapter output current	2 A
AC adapter output voltage	8 V
Type	Hand camera stabilizer
Material	Aluminium, Polyblend
Mounting	1/4\
Motorized	Yes
Pan range	0 - 360 °
Motor type	Brushless motor
Applicability	Universal
Certification	CE
Product color	Black
Tilt angle range	-135 - 185 °
Angle of rotation	360 °
Compatible products	Canon EOS Series Panasonic Lumix Series Sony ILCE Series Nikon D Series
Maximum weight capacity	3.2 kg
Operating temperature (T-T)	-10 - 45 °C
Package depth	502 mm
Package width	141 mm
Package height	270 mm
Package weight	3700 g
Cables included	USB

Weight and Dimensions

Depth	210 mm
Width	118 mm
Height	450 mm
Weight	1250 g