Zhiyun CRANE 2 User Manual

27
Motor Fine-tuning
Firmware Upgrade
Fine tune the motor through stabilizer:
1. Power on the stabilizer and enter standby mode, then rotate the dial and press
right to enter the “angle” option; Adjust the value of the tilt and roll axis angle to
your actual needs.
2. Fine tune the motor through APP:
3. Connect the stabilizer to "ZY Play". Enter “Gimbal Settings”, and adjust the
value of the tilt and roll axis angle to your actual needs.
Connect the stabilizer to your computer via Micro USB cable to get ready for the
firmware upgrade and calibration.
1. Visit ZHIYUN's offcial website: www.zhiyun-tech.com Click “DOWNLOAD”
and find the Firmware Upgrade Tutorial package, then download the driver,
calibration tool and latest firmware corresponding to your stabilizer. (USB driver
installation is not needed for Mac and WIN 10 system).
2. Connect the stabilizer to your computer via Micro USB cable, power on the
stabilizer and finish the installation of the driver.
3. Power on the stabilizer and long press mode button to enter standby mode.
4. Enter the downloaded “Zhiyun Gimbal Tools” and upgrade firmware following
the instructions indicated in the Firmware Upgrade Tutorial.
Make sure the batteries have been
properly installed before upgrade.
USB
Calibration and Firmware Upgrade

Zhiyun CRANE 2 Specifications

General

Battery type	AA
Operating time	18 h
Battery voltage	3.7 V
Battery capacity	6000 mAh
AC adapter output current	2 A
AC adapter output voltage	8 V
Type	Hand camera stabilizer
Material	Aluminium, Polyblend
Mounting	1/4\
Motorized	Yes
Pan range	0 - 360 °
Motor type	Brushless motor
Applicability	Universal
Certification	CE
Product color	Black
Tilt angle range	-135 - 185 °
Angle of rotation	360 °
Compatible products	Canon EOS Series Panasonic Lumix Series Sony ILCE Series Nikon D Series
Maximum weight capacity	3.2 kg
Operating temperature (T-T)	-10 - 45 °C
Package depth	502 mm
Package width	141 mm
Package height	270 mm
Package weight	3700 g
Cables included	USB

Weight and Dimensions

Depth	210 mm
Width	118 mm
Height	450 mm
Weight	1250 g