21 zhiyun-tech.com
Sony Camera Control Line (purchase separately)
Applicable camera models: Compatible with SONY
cameras controlled by MULTI port.
Supported Functions:
1.Shutter control
2.Video recording
3.Zooming
NOTICE: Optical zooming is not supported in case of non-electrical lenses (Recommended electrical zoom
lenses: E PZ 18-105mm F4 GOSS, E PZ 16-50mm F3.5-5.6 OSS).
Compatible Stabilizer Model(s):
CRANE, CRANE-M with firmware version of V1.50 and above.
How to Use
Connection
1. Firstly, connect the stabilizer to your PC or smart phone.
2. Configure the stabilizer to suits "Sony" in Gimbal Setting Screen, then save the settings.
3. Connect the Micro USB plug of the SONY camera control line to the camera connection port on the side
of the tilt motor, and then connect the other end of the control line to the MULTI port on the camera.
4. Power on the stabilizer before turning on the camera, otherwise camera remote control may not work
Operations
1. Shutter control (including focusing): Press the Power Button to take single shots.
2. Video recording: Double press the Power Button
to start video recording, and double press again to
stop recording.
3. Zooming: Push the Shifter Lever on the stabilizer
handle in T direction to zoom out or W direction to
zoom in.
Usage of Main Accessories
To Next Page
Loading...
Need help?
General
