Zhiyun Evolution User Manual

17 zhiyun-tech.com
Calibration Procedure
Off-line Calibration
1. Power up the stabilizer. The
Battery Level Indicator lights up
in solid BLUE and then starts
flashing as the stabilizer enters
standby mode.
4. Lay the stabilizer still on a
surface with the Tilt Axis Motor
facing down, until the Indicator
starts flashing 2 times each
second.
2. Push the Joystick up for one 1
sec. until the Indicator shines
solid BLUE.
5. Lay the stabilizer still on a
surface with the Tilt Axis Motor
facing up, until the Indicator
starts flashing 3 times each
second.
3. Push the Joystick down for one
1 sec. until the Indicator starts
flashing (once each second).
Now, it is ready for calibration.
6. Lay the stabilizer still on a
surface with the Mobile Clamp
facing down, until the Indicator
starts flashing 4 times each
second.

Zhiyun Evolution Specifications

General

Brand	Zhiyun
Model	Evolution
Category	Camera Accessories
Language	English