Zhiyun RIDER-M User Manual

11 zhiyun-tech.com
Introducing Gimbal Control Modes
MODE
Mode switch:The stabilizer enters Pan Following Mode by default each time when powered on. Switch into
Locking Mode by single pressing on the Joystick. Double press the Joystick to enter the Following mode.
Single press the Joystick under the Following Mode will return to the previous mode.
Roll Axis
Roll Axis
Roll Axis
Tilt Axis
Tilt Axis
Tilt Axis
Pan Axis
Pan Axis
Pan Axis
Pan Following Mode: The camera pans left/right following the
movement of the stabilizer while the tilt and roll axes are locked.
Pan
Following
Mode
Double Press MODE
Single Press MODE
Double Press MODE
Single Press MODE
Single Press MODE
Single Press MODE
Locking
Mode
Following
Mode
Locking Mode:This mode locks movement of all three axes to
keep the camera still and stable.
Following Mode: The camera pans and tilts following the
movement of the stabilizer.

Zhiyun RIDER-M Specifications

General

Brand	Zhiyun
Model	RIDER-M
Category	Camera Accessories
Language	English