Zhiyun RIDER-M User Manual

18zhiyun-tech.com
Off-line Calibration
Off-line Calibration
Calibrate the stabilizer when any of the following circumstances occurs:
1. Deviation is found in the balancing of the camera even after initialization.
2. The stabilizer has not been used for a long time.
3. The stabilizer is exposed to severe temperature change (Calibration is required, as excessive temperature
differences in operation environments may affect various parameter indexes of the inner part of the built-in
gyroscope).
Calibration Procedure:Users may choose either wireless or wired remote control (purchase separately) to
operate calibration according to actual situations.
or
or
or
① Powerupthestabilizer.Connectthe remote
control to the stabilizer.
② Pushthe Joystickup (orpress theUPbutton)
for one 1 sec. until the stabilizer’s Battery Level
Indicator shines solid light.
③ PushtheJoystickdown(orpresstheDOWN
button) for one 1 sec. until the Indicator starts
flashing (once each second). Now, it is ready
for calibration.

Zhiyun RIDER-M Specifications

General

Brand	Zhiyun
Model	RIDER-M
Category	Camera Accessories
Language	English