4
Mounting and Balancing Mobile Phone
Take out the phone holder from the packing box and mount it on the stabilizer according
to the following steps:
Mounting Phone Holder
Mounting Mobile Phone
1 2 3 4
Extend the phone holder and put the phone into the phone holder
① After the balancing, if need to take out
the phone for other use, please take out
it along with the phone holder and insert
the phone holder into the slot to resume
use.
② Press down the horizontal arm to fold
up the stabilizer for storage after power-
off.
Do not turn on the stabilizer before the mobile phone is mounted.
❶ Loosen the latch;
❷ Put the phoneholder
close to the base plate;
❸ Insert the phone holder
into the slot and adjust it
to the middle part;
❹ Tighten the
latch.
Balancing Mobile Phone
The balancing state of the mobile phone
has a great impact on stabilizer runtime.
The stabilizer can work even in the
unbalanced state but it will consume
more energy of the battery and reduce
stabilizer torque.
Put the phone lens face up, then move the phone left or right until the phone is steady
and is almost level with the ground.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
