Zhiyun SMOOTH-Q2 User Manual

5
❶
❷
❸
❹
❶
Indicator Lights
• In the working state, single white indicator
light stays on to indicate the current mode
of the stabilizer; The indicator for POV
mode blinks when the stabilizer is in Vortex
(V) mode.
• In the standby state, the four white indicator
lights blink slowly.
• In low power state, the red PF light blinks
slowly and the stabilizer automatically turns
off one minute later.
• When charging the stabilizer in power-off
state, the four white indicator lights will blink
one by one to indicate the current battery
level.
• The red PF indicator light will blink quickly
when charging the stabilizer without any
batteries.
• Single click the power button to check the
battery level.
One blinking indicator light: 0-25% battery
level.
Two blinking indicator lights: 25%-50%
battery.
Three blinking indicator lights: 50%-75%
battery level.
Four blinking indicator lights: 75%-100%
battery level.
❷
Joystick
• Four-way direction control of the camera/
lens on the stabilizer.
• Single press to change stabilizer mode.
• Double press to return to the previous
mode.
• Long press for 2 seconds to enter or exit
standby mode
❸
Photo/Video Button
• Single click to take a photo in photo mode
in ZY Play App.
• Single click to start/stop recording video in
video mode in ZY Play App.
• Double click to switch between front
camera and rear camera in ZY Play App.
• Triple click to lift the tilt axis to avoid the
stabilizer arm appearing in the screen when
using ultra-wide phone cameras (Invalid in
Pan Following and Locking mode).
• After Bluetooth connected, the stabilizer
will be able to control the native cameras of
compatible mobile phones to take photos
or record videos.
❹
Power Button
• Long press the stabilizer to turn on/off the
stabilizer (release the button when the PF
indicator light blinks).
• Single click to check the battery level.
• Double click to reset the motors (invalid in
POV mode and Vortex mode).
• Triple click to enter Selfie mode (invalid in
Locking mode and Vortex mode)
After Bluetooth connected, the SMOOTH-Q2 will be able to control the native cameras of some
mobile phones without ZY Play (applicable only to mobile phones that can use the volume button
as a shutter button; no password needed when connecting the mobile phone to the stabilizer via
Bluetooth).
How to Use
Indicator Lights and Buttons Description

Zhiyun SMOOTH-Q2 Specifications

General

Type	Smartphone camera stabilizer
Material	Aluminum
Motorized	Yes
Applicability	Universal
Product color	Black
Number of axis	3
Angle of rotation	360 °
Compatible products	Google: Pixel XL, Pixel 2 XL, Pixel 2, Pixel, Nexus 6P, Nexus 6, Nexus 5X Samsung: Galaxy S9 Plus, Galaxy S9, Galaxy S8 Plus, Galaxy S8, Galaxy Note 8 Huawei: P9, P20 Pro, P10 Plus, P10, Mate 9, Mate 8, Mate 10 Pro, Mate 10 Oneplus: 6, 5T, 5, 3T, 3 Xiaomi: Redmi Note 4X, Redmi Note 3, MI 6, MI 5s, MI 5, MI 4 LG: G6, G5 Oppo: R9s, Find X Vivo: X7, NEX
Maximum device width	86 mm
Minimum device width	65 mm
Maximum weight capacity	0.26 kg
Charging time	3 h
Operating time	17 h
Battery voltage	3.6 V
Battery capacity	4500 mAh
AC adapter output current	2 A
AC adapter output voltage	5 V
Operating temperature (T-T)	-10 - 45 °C
Mechanical roll range	0 - 265 °
Mechanical tilt range	0 - 305 °
Bluetooth version	5.0
Cables included	USB
Country of origin	China

Weight and Dimensions

Depth	266 mm
Width	121 mm
Height	54 mm
Weight	517 g