• To increase or decrease the brake tension either
a. Turn the adjustment screw counterclockwise
to increase tension and lock the adjustment
by turning the locking nut clockwise.
b. Turn the adjustment screw clockwise to
decrease tension and lock the adjustment by
turning the locking nut clockwise.
WARNING! If brake adjustment tension is low this may cause the rollator to move even
when locked.
Care And Maintenance
Your Zip’r Rambler Rollator requires a minimal amount of maintenance. The following are the
maintenance items that should be followed to ensure that your rollator walker is both safe and
operational.
Daily
• Always store your rollator in a warm and dry climate-controlled environment.
• Always lock in the brakes when getting on and off the scooter. It will ensure extra
stability and keep it from rolling away.
•
Cleaning
• The rollator is made from durable metals along with ABS plastic. The rollator can be
cleaned using a damp towel.
• A damp cloth can be used to clean the seat and backrest, ensuring that the backrest and
seat are dry prior to sitting on your rollator.
PROHIBITED! Do not apply rubber conditioner on the tire tread; this may cause the
tires to become dangerously slippery.
PROHIBITED! Do not use a rubber or vinyl conditioner on the walkers seat or backrest,
doing so may cause the surfaces to become dangerously slippery resulting in personal
injury and/or damage to your rollator.
Maintenance
• Keep the rollator walker stored indoors to avoid moisture and rust.
• Regularly check the tires for wear and replace if worn.
• Do not use a water hose or power sprayer to clean the knee scooter.
• Make sure all nuts and bolts are tight.
• Regularly check brake cables if worn contact Zip’r if worn.
To Next Page
Loading...
Need help?
General
