29
COOKTOP COOKING
Surface Burner Operation - Electric Ignition
To activate the electric ignition, simply turn the control knob counter-clockwise to
maximum power, then press the knob in to start the flow of gas and the ignition spark.
The spark will be released at the metal tip of the white ceramic pin located on the side
of the burner. Once the flame is on, release the control knob gently. If the flame turns
off, simply repeat the above procedure.
Manual Ignition
Manual ignition is always possible even when the power is cut off or in the event of
a power failure. Turn the control knob counter-clockwise to the MAXIMUM position;
light the flame with a kitchen lighter or with a match.
Using the Burners Correctly
1. Always check that the burner caps are properly installed before operation:
2. Verify that the flame of the worktop burners is completely blue and with a regular
aspect as shown below:
3. Never let flames wrap around cookware.
DO NOT ignite the burners if the black burner cap is not installed or
not centered, the flame will be irregular.
Keep children at a safe distance from the appliance during
operation. DO NOT allow children to operate the appliance!
WARNING
WARNING
A
B
A
B
Correct
Incorrect
A
B
A
B
A
B
Correct
Incorrect
Correct Incorrect
A
B
A
B
A
B
Correct
Incorrect
Correct Incorrect
A
B
To Next Page
Loading...
Need help?
General
