EasyManuals Logo
Home>Zline>Ranges>RA-WM-24

Zline RA-WM-24 User Manual

Zline RA-WM-24
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
30
Be sure to set all worktop/oven/broiler burner controls to the OFF position after each
use of the appliance.
Maximum temperature setting/recommended control knob position for burner
ignition.
The regulating knobs should be turned in anti-clockwise direction until the small flame
symbol, vice- versa for the larger flame symbol. To light up the burner, keep pushing
the knob and turn it anti-clockwise to maximum, and hold it for 3 to 5 seconds.
The ignition will spark and ignite the burner. At this position, the gas supply is at
the maximum and the flame also at its maximum. You can reduce the flame size by
turning the knob in anti-clockwise direction. Should the burner fail to light up, turn the
knob to its original position and try again. Your burner flame should be blue in colour.
NOTE: When igniting a burner, all burners will spark, but only the burners knob you
are using will ignite the flame.
NOTE: When first used, the gas burner will not ignite immediately. Time is required for
the LPG to fully fill the operating system.
OFF
COOKTOP COOKING
The flame color should always be blue. Flickers of orange and
yellow are acceptable. If flames appear orange or yellow and stay
that way, check the surrounding area. Candles, cleaning products,
and other changes in atmosphere can affect the flame color.
WARNING
OFF
Maximum Flame Height
Minimum Flame Height

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zline RA-WM-24 and is the answer not in the manual?

Zline RA-WM-24 Specifications

General IconGeneral
BrandZline
ModelRA-WM-24
CategoryRanges
LanguageEnglish

Related product manuals