47
2. Once you have established the connection, touch and dial
the second number. (This puts the first caller on hold.)
3. When you’re connected to the second party, touch to
merge the two calls.
If one of the people you called hangs up during your call, you and
the remaining caller stay connected. If you initiated the call and
are the first to hang up, all callers are disconnected.
4. To end the conference call, touch .
Adjusting Your Call Settings
From the home screen, touch > > Settings.
Display options: Touch Sort by or Name format to set the
order of the contacts and the format of the contact names.
Sounds and vibration: Touch Phone ringtone to select the
ringtone for incoming calls. Touch Also vibrate for calls to
enable the vibration when you receive calls. Touch Keypad
tones to enable the sound which will play when you touch the
keypad keys.
Answer and end calls: Touch the Power button ends call
slider to enable or disable ending calls by pressing the Power
key; touch the Vibrate when call is answered slider to
enable or disable vibration when a call is answered.
Speed dial: You can touch and hold the 1 ~ 9 keys from the
dialer to call the corresponding speed dial number.
Call settings: Configure the call settings.
To Next Page
Loading...
Need help?
General
