Accessing the Internet
Before accessing the Internet, please make sure that the following operations are finished.
Your device is connected via a network cable or Wi-Fi.
Your PC is configured.
To access the Internet:
1. Log in the 4G CPE Page.
1) Launch the Internet browser and enter http://192.168.0.1 in the address bar. The login
page appears.
2) Input the password and then click Login. The default password is admin.
2. View the current mode on the left top of the 4G CPE page, and then click Change.
3. Select an operation mode which you want to use and then click Apply.
NOTE: If you change the operation mode, the device will be restarted automatically.
4. Set the detail parameters for the operation mode.
To Next Page
Loading...
Need help?
General
