EasyManuals Logo
Home>Zte>Wireless Router>MF283U

Zte MF283U User Manual

Zte MF283U
11 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
8
NOTE:
You can view the label on your device to get the default Wi-Fi SSID and password
.
5. Wait until the client device is connected to your device successfully.
Troubleshooting
Voice Related Problems
Symptoms Possible Problems/ Solutions
There is no dial tone.
Please wait for 1~2 minutes after the router is turned
on.
If the SIG indicator is blinking, you have no good RF
reception. Change the location of the router.
There is a prompt / phone alert / announcement as soon as
I lift the phone off the hook.
Make sure your (U)SIM card is inserted correctly and
the PIN number has been entered. If the PIN number has
been entered incorrectly then you will need to enter the
PUK code when prompted.
The line is noisy/distorted when I lift the phone off the
hook.
Remove any electrical appliance which is too close to
the phone or your device.
The cable or phone set might be faulty.
I hear a rapid engaged tone as soon as I lift the phone off
the hook.
Put the phone on the hook and try again.
Please contact with your servicer provider.
After dialing the last digit I hear nothing/silence.
When you have finished dialing you can press the # key
or wait 4~8 seconds to connect the call.
Internet Related Problems
Symptoms Possible Problems/ Solutions
I cannot access the Internet at all.
Please check your configuration settings.
Please wait 1~ 2 minutes for the router to initialize.
Check your service indicators.
The download or upload speed is very slow.
The speed is dependent on signal strength. Check your
signal strength and network type.
I cannot visit the 4G CPE page.
Enter the correct address. The default address is
http://192.168.0.1.
Only use one network adapter in your PC.
Do not use any proxy server.
I cannot establish the Wi-Fi connection between my device
and the client.
Make sure the Wi-Fi function is active.
Refresh network list and select the correct SSID.
Check the IP address to make sure your client can
obtain an IP address automatically in the Internet

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zte MF283U and is the answer not in the manual?

Zte MF283U Specifications

General IconGeneral
DSL WAN-
Ethernet WANYes
Wi-Fi bandSingle-band (2.4 GHz)
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
WLAN data transfer rate (max)300 Mbit/s
Ethernet LAN interface typeEthernet
Number of guest networks (2.4 GHz)32
5GNo
4G standardLTE-TDD & LTE-FDD
2G standardsEDGE, GPRS, GSM
3G standardsDC-HSPA+, HSPA, UMTS
Mobile network generation4G
RJ-11 ports quantity2
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports4
Product typeTabletop router
Product colorWhite
LED indicatorsActivity, LTE, Power, Status, WAN
Antenna connector typeSMA
Power source typeAC
Mac operating systems supportedMacOS
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows Vista, Windows XP
Weight and Dimensions IconWeight and Dimensions
Depth56 mm
Width190 mm
Height150 mm

Related product manuals