Zte MF288 User Manual

ZTE MF288 User Guide
16 Confidential and Proprietary Information of ZTE CORPORATION
Select Wi-Fi Settings > WPS
You can enable Wi-Fi Protected Setup (WPS) by PIN (PIN code) or PBC (push-button) mode; the
two modes are described below:

PIN：A device will need to provide the specified PIN to connect to the network when using
WPS.

PBC：Press the WPS button of the device or select PBC, and then click Apply. Press the
WPS button on the client wireless adapter within two minutes, and the negotiation process
will be established.
NOTE:
Your device has two WPS selections to configure the two Wi-Fi SSIDs.
Router Settings
Select Advanced Settings > Router
The router information is shown in the following figure:

Zte MF288 Specifications

General

Brand	Zte
Model	MF288
Category	Network Router
Language	English