7
NOTE: Do not put anything on the top of the router. Do not lay routers to overlap
each other during usage.
2. Wait 1~2 minutes after turning the router on before you use the service. The
3G & POWER indicator should be lit on.
NOTES:
•
When the router is turned off, an incoming caller will hear the prompt like “The
number you have dialed is currently unavailable.”
• If the 3G LED is blinking constantly, try to move the router to another location.
The router takes 1~2 minutes to initialize, attach to the network and obtain an
IP address.
Power Supply
For normal operation, connect the router to the external power adapter. In case of
power failure or when there is no available external power supply, the router will not
work.
About (U)SIM Card
Avoid handling the (U)SIM card unnecessarily. Hold the card by the edges to pre-
vent static damage. Keep the (U)SIM card away from electrical and magnetic appli-
ances.
If you cannot get service, make sure that
• You are in an area which has network coverage.
• You are using the correct (U)SIM card.
To Next Page
Loading...
Need help?
General
