Zte MF65 Manual

13
Using the cable to connect to the xed
broadband
1. Connect the cable.
2. Congure the settings of your device for the xed broadband.
1) Log in the webGUI conguration page.
2) Select Settings > Ethernet Settings > Dial Mode.
3) Enter the parameters and then click Apply.
TIP:
Please contact with your service provider for the xed broadband
information.
3. Use your client to enjoy the Internet service.
Conguring Your PC
Follow the following steps and gures for Windows XP to congure
the Internet Protocol for your Wi-Fi connection.
1. Right-click My Network Places, and then select Properties.

Zte MF65 Specifications

General

Type	Mobile
Networking features	HSDPA/3G UMTS/GSM
DC-in jack	Yes
Internal	No
Number of WLAN connections (max)	5
Maximum data transfer rate	21.6 Mbit/s
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n

Weight and Dimensions

Weight	75 g
Dimensions (WxDxH)	50 x 13.7 x 102 mm