Zte nubia Z50S Pro User Manual

7
Charging the Phone
Your phone’s battery should have enough power for the
phone to turn on, find a signal, and make a few calls. You
should fully charge the battery as soon as possible.
WARNING!
Use only ZTE-approved chargers and USB Type-C cables. The
use of unapproved accessories could damage your phone or
cause the battery to explode.
WARNING!
Do not remove the back cover. The battery is not
removable. Removal may cause fire or explosion.
1. Connect the adapter to the charging jack.
2. Connect the charger to a standard AC power outlet.
3. Disconnect the charger when the battery is fully
charged.
NOTE:
If the battery is extremely low, you may be unable to power
on the phone even when it is being charged. In this case, try
again after charging the phone for at least 20 minutes.
Contact the customer service if you still cannot power on the
phone after prolonged charging.

Zte nubia Z50S Pro Specifications

General

Display Size	6.78 inches
Display Type	AMOLED
Resolution	1260 x 2800 pixels
Refresh Rate	120Hz
Processor	Qualcomm Snapdragon 8 Gen 2
RAM	12GB / 16GB
Storage	256GB / 512GB / 1TB
Front Camera	16 MP
Battery Capacity	5100 mAh
Operating System	Android 13, nubia UI
Weight	228 g
SIM	Dual SIM (Nano-SIM, dual stand-by)
Main Camera	50 MP (wide) + 8 MP (ultrawide) + 50 MP (telephoto)
Charging	80W wired
Network	5G
Colors	Black, Silver