Confidential and Proprietary Information of ZTE CORPORATION 23
Disposal of Your Old Appliance
When this crossed-out wheeled bin symbol is attached to a product, it
means the product is covered by the European Directive 2002/96/EC.
All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
For this product’s recycling information based on WEEE directive, please send an e-mail to
weee@zte.com.cn
Troubleshooting
Failing to establish a
connection between your
device and a client through
Wi-Fi
Ensure that the Wi-Fi function is enabled.
Refresh the network list and select the correct SSID.
Check the IP address, and ensure that your client can automatically
obtain an IP address.
Enter the correct network key (Wi-Fi password) when you connect
the client to your device.
The client connected to the
device cannot access the
Internet.
Ensure that your UIM card is available.
Change the location and find a place with good signal.
Check the setting of the WAN connection mode.
Contact your service provider and confirm your APN settings.
Failing to visit the web UI
configuration page
Enter the correct address. The default address is http://192.168.0.1 or
http://mobile.hotspot.
Use only one network adapter in your PC.
Do not use any proxy server.
Select Device Info on the LCD screen to check the default login
password or check the label on the device to get it.
If you set the Wi-Fi connection password or change the web UI
password and forgot the new one, select Device Info on the LCD
screen to check the password.
For more assistance, please:
• Send E-mail to mobile@zte.com.cn
• Visit www.ztedevice.com
• Call Service Hotline: +86–755–26779999
To Previous Page
Loading...
Need help?
General
