ZXDSL 831 ADSL MODEM User’s Manual
3.2 ZXDSL 831C Factory Defaults
The device is deployed with the following factory defaults:
• IP address: 192.168.1.1, Subnet mask: 255.255.255.0
• Four sets of VPI/VCI: 0/32, 0/35, 8/35, 8/81，0/33，0/100，8/36，1/39
• Line code: Auto
3.3 Local PC Configuration
3.3.1 Windows
95, 98, ME, XP
1. In the Windows task bar, click the “Start” button, point to “Settings”, and then
click “Control Panel”.
2. Double-click the “Network” icon.
3. On the “Configuration” tab, select the TCP/IP network associated with your
network card and then click “Properties”.
4. In the “TCP/IP Properties” dialog box, click the “IP Address” tab. Set the IP
address as 192.168.1.x (x can be a decimal number from 2 to 254.) like
192.168.1.2, and the subnet mask as 255.255.255.0.
5. On the “Gateway” tab, set a new gateway as 192.168.1.1, and then click “Add”.
6. Configure the “DNS” tab if necessary. For information on the IP address of the
DNS server, please consult with your ISP.
7. Click “OK” twice to confirm and save your changes.
8. You will be prompted to restart Windows. Click “Yes”.
To Next Page
Loading...
Need help?
General
