ZIP4x5 User’s Guide
Version 1.0.2 9
You can also dial a number or address when searching the phone book
(Menu | Phone Book | Search) by selecting a number or address and
pressing the Enter button.
Redial
The ZIP4x5 stores contact information of the 32 most recent phone calls.
Press the Redial key to view the most recently dialled number. Press the
Up and Down buttons or the Volume Control key to move through the
list of numbers. The most recent call is displayed as Redial 01.
Press the Redial button again to call the displayed redial number.
Voice Activated Dialling
The ZIP4x5 can dial selected contacts in your phone book and access
voice mail through voice commands. To activate voice commands on
your phone, select Menu | User Settings | Voice Commands | Enable,
then press the Enter button.
To train the phone to recognize your voice commands, select Menu |
User Settings | Voice Commands | Hot Words.
To train the phone to recognize your contacts, select Menu | User
Settings | Voice Commands | Phone Book.
To dial a contact using voice activated commands:
1. Take the phone off hook. You should hear a normal dial tone.
2. Speak the voice command that you recorded for “Dial Number”. The
dial tone will stop and you will hear a single beep.
3. Speak the name of the contact that you wish to dial. The phone will
repeat the name of the contact.
4. If the phone repeats the name of the proper contact, say “Yes”. The
phone will then dial that number. If the phone does not repeat the
name of the proper contact, say “No” and restart the process.
To Next Page
Loading...
Need help?
General
