ABB ACH 501 User Manual

Chapter 6 – Parameters
6-40 ACH 500 Programming Manual
Group 30.4
Information
You cannot alter these parameter values. The Range/Unit column in Table 6-
19 shows parameter values. The text following the table explains parameter
values in detail.
Table 6-19 Group 30.4
1 CRI PROG VERSION This parameter displays the Control Interface Card version installed in your
ACH 500.
2 MC PROG VERSION This parameter displays the Motor Control Card version installed in your
ACH 500.
3 TEST DATE This parameter displays the date of the ACH 500 final test.
Group 30.5
I/O Status
You cannot alter these parameter values. The Range/Unit column in Table 6-
20 shows parameter values. The text following the table explains parameter
values in detail. The parameters in this group show the status of the I/O.
Table 6-20 Group 30.5
Parameter Range/Unit Description
1 CRI PROG VERSION CRHxxy Control Interface Card program
version.
2 MC PROG VERSION MCRxxy/CNTxxy Motor Control Card program version.
3 TEST DATE YY.MM.DD Test date (year,month,day).
Parameter Range/Unit Description
1 DI1-6 STATUS 000000 Indication of the status of the six
digital inputs. 0=Open; 1=Closed
2 AI1 V/mA 0.00/ 0.00 Signal at Analog Input 1 in volts and
milliamps
3 AI2 V/mA 0.00/ 0.00 Signal at Analog Input 2 in volts and
milliamps
4 RO1-3 STATUS 000 Indication of the status of the three
relay outputs. 0=Open; 1=Closed
5 AO1 mA/% 0.00/ 0% Signal at Analog Output 1 in
milliamps and percent.
6 AO2 mA/% 0.00/ 0% Signal at Analog Output 2 in
milliamps and percent.

ABB ACH 501 Specifications

General

Brand	ABB
Model	ACH 501
Category	Controller
Language	English