ABB ACH580-01 Series User Manual

Mechanical installation – Frames R1 to R3 21
Installation procedure
1. To remove the fan assembly, push the retaining clips. Lift the assembly up.
2. Insert the sealing plug (a) to the hole. The sealing plug is installed in IP55 (UL
Type 12) drives at the factory.
IP21 (UL Type 1)
a
IP21 (UL Type 1)

ABB ACH580-01 Series Specifications

General

Category	DC Drives
Series	ACH580-01
IP Rating	IP21, IP55
Mounting	Wall-mounted
Control Method	vector control
Communication Protocols	Modbus RTU, BACnet MS/TP
Protection Features	Overcurrent, overvoltage, undervoltage, overload, short circuit, overtemperature
Operating Temperature	-10°C to +50°C
Storage Temperature	-40 to +70 °C
Relative Humidity	5% to 95% (non-condensing)
Altitude	Up to 1000 m without derating