34 Mechanical installation – Frames R4 and R5
Unpacking and examining the delivery
Transport package contents
The flange mounting kit package is tied with straps onto the drive package or sent
separately. Examine that all items are present and there are no signs of damage.
Read the data on the type designation label of the drive to make sure that the drive is
of the correct type.
To unpack:
• Cut the str
aps.
• Remove the flange mounting kit package. For the contents of the kit package,
see Flange mounting kit package contents on page 35.
• Remove the drive cardboard box and option box.
• Remove the cover protecting film. For the contents of the drive package, see the
drive hardware manual.
• Lift the drive.
To Next Page
Loading...
Need help?
General
