Need help?Do you have a question about the ABB ACH580-01 Series and is the answer not in the manual?
General| Category | DC Drives |
|---|---|
| Series | ACH580-01 |
| IP Rating | IP21, IP55 |
| Mounting | Wall-mounted |
| Control Method | vector control |
| Communication Protocols | Modbus RTU, BACnet MS/TP |
| Protection Features | Overcurrent, overvoltage, undervoltage, overload, short circuit, overtemperature |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -40 to +70 °C |
| Relative Humidity | 5% to 95% (non-condensing) |
| Altitude | Up to 1000 m without derating |
Specifies the drives and flange mounting kit compatibility.
Identifies intended users and required knowledge for the supplement.
Explains the main objective of the document regarding installation.
Lists other relevant manuals and guides for the drives.
Describes the components and function of the flange mounting kit.
Details the placement and orientation of flange-mounted drives.
Illustrates drive mounting in a tilted configuration for specific frames.
Illustrates drive mounting in an upright configuration for specific frames.
Details IP ratings for the drive with flange mounting.
Outlines specific conditions or modifications needed for certain installations.
Lists product codes for the flange mounting kit and related items.
Provides general safety precautions for drive installation.
Details site requirements for proper drive installation and ventilation.
Specifies extra considerations for drives installed within cabinets.
Lists the tools necessary for mechanical drive installation.
Provides guidance on safely transporting the drive to the installation site.
Explains spacing requirements when mounting drives vertically.
Instructions for unpacking and checking drive and kit contents.
Lists all components included in the flange mounting kit.
Describes the use of the template for hole drilling and cutting.
Specifies clearance needed above and below drives for installation.
Step-by-step guide for mechanically installing drives R1 to R3.
Covers optional procedures like installing grounding plates.
Instructions for unpacking and checking drive and kit contents.
Lists all components included in the flange mounting kit.
Describes the use of the template for hole drilling and cutting.
Specifies clearance needed above and below drives for installation.
Step-by-step guide for mechanically installing drives R4 and R5.
Highlights critical safety warnings for lifting and handling larger drives.
Instructions for unpacking and checking drive and kit contents.
Lists all components included in the flange mounting kit.
Describes the use of the template for hole drilling and cutting.
Specifies clearance needed above and below drives for installation.
Step-by-step guide for mechanically installing drives R6 to R9.
Provides detailed dimensions for drive frame R1 and mounting.
Provides detailed dimensions for drive frame R2 and mounting.
Provides detailed dimensions for drive frame R3 and mounting.
Provides detailed dimensions for drive frame R4 and mounting.
Provides detailed dimensions for drive frame R5 and mounting.
Provides detailed dimensions for drive frame R6 and mounting.
Provides detailed dimensions for drive frame R7 and mounting.
Provides detailed dimensions for drive frame R8 and mounting.
Provides detailed dimensions for drive frame R9 and mounting.
Contact information for product support and service.
Information on available training programs for ABB products.
Channel for submitting comments and feedback on product manuals.
Link to access PDF manuals and product documents online.
To Next Page
