EU Declaration of Conformity
Machinery Directive 2006/42/EC
We
Manufacturer: ABB Oy
Address: Hiomotie 13, 00380 Helsinki, Finland.
Phone: +358 10 22 11
declare under our sole responsibility that the following product:
Frequency converter(s)
with regard to the safety function(s)
The following harmonized standards have been applied:
EN 61800-5-2:2007
EN 62061:2005 + AC:2010 + A1:2013 + A2:2015
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN 60204-1: 2006 + A1:2009 + AC:2010
The following other standards have been applied:
IEC 61508:2010, parts 1-2
IEC 61800-5-2:2016
Person authorized to compile the technical file
Name and address: Risto Mynttinen, Hiomotie 13, 00380 Helsinki, Finland.
Manufacturer representative: Tuomo Tarula
Vice President, ABB Oy
Document number 3AXD10000486283
The product(s) referred in this Declaration of conformity fulfil(s) the relevant provisions of other European Union Directives
which are notified in Single EU Declaration of conformity 3AXD10000497692.
ACQ580-01/-31
Safety of machinery – Safety-related parts of the control systems.
Part 2: Validation
Safety of machinery – Electrical equipment of machines – Part 1:
General requirements
Functional safety of electrical / electronic / programmable
electronic safety-related systems
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements - Functional
Safety of machinery – Safety-related parts of control systems. Part
1: General requirements
Safety of machinery – Functional safety of safety-related electrical,
electronic and programmable electronic control systems
Adjustable speed electrical power drive systems – Part 5-2: Safety
requirements - Functional
is/are in conformity with all the relevant safety component requirements of EU Machinery Directive 2006/42/EC, when the
listed safety function is used for safety component functionality.
Safe Torque Off
Page 1 of 1
To Next Page
Loading...
Need help?
General
