ABB Power Capacitors | Portable Capacitance Meter CB-2000 — User´s Guide 27
4. User interface
Press the
key for more than 3 seconds to enter the Clock and date adjust menu.
Press the key to enter the Measurement menu for the specific capacitor. A maximum of 1000
capacitor units can be stored in the CB-2000. An “OUT OF MEMORY” message is displayed if further
capacitor units are added. If this occurs, download measurements to a PC for safe keeping and/or
erase outdated measurements.
4.4 Measurement menu
1. Order and serial number combined.
2. Latest measurement followed by previous ones; maximum of five.
3. Time stamp of latest measurement.
4. Reference capacitance, if one exists.
5. Internal temperature for the latest measurement.
Press any key but to return to the main menu.
Press the key to make and add a new measurement to the list. The measurement takes about 5
seconds and “…. “ is displayed in the lower-right corner while the data is processed. When the mea-
surement is finished, the window will be updated with new data. If 5 measurements have already been
made, the oldest is replaced according to the FIFO (First In First Out) principle.
Reference capacitance can be uploaded to the CB-2000; see sections 5.1 and 5.3 for details. If no
values have been uploaded, it is set to 0 by default.
Measurements with results higher than 1000 μF are displayed as “>1000”.
ABCHF1C 015
133.0 135.8 137.8
123.2
2008-04-16 12:14:58
22
°
C
1
2
3
4
5
To Next Page
Loading...
Need help?
General
