ABB DSQC1003 User Manual

5 System parameters
5.1 Introduction
About the system parameters
There are both PROFINET specific parameters and more general parameters. This
chapter describes all PROFINET specific system parameters. The parameters are
divided into the type they belong to.
For information about other system parameters, see Technical reference
manual - System parameters.
PROFINET system parameters
Industrial Network
These parameters belong to the type Industrial Network in the topic I/O System.
For more information, see ...Parameter
Technical reference manual - System parametersName
Technical reference manual - System parametersIdentification Label
Technical reference manual - System parametersAddress
Subnet Mask on page 37Subnet Mask
Gateway on page 38Gateway
PROFINET Station Name on page 39PROFINET Station Name
Internal Anybus Device
These parameters belong to the type Internal Anybus Device in the topic I/O System.
For more information, see ...Parameter
Technical reference manual - System parametersName
Technical reference manual - System parametersConnected to Industrial
Network
Technical reference manual - System parametersSimulated
Technical reference manual - System parametersVendor Name
Technical reference manual - System parametersProduct Name
Technical reference manual - System parametersIdentification Label
Input Size on page 40Input Size
Output Size on page 41Output Size
Application manual - PROFINET Anybus Device 35
3HAC050968-001 Revision: C
© Copyright 2008-2016 ABB. All rights reserved.
5 System parameters
5.1 Introduction

ABB DSQC1003 Specifications

General

Brand	ABB
Model	DSQC1003
Category	Controller
Language	English