Manual for Induction Motors and Generators
18 - Transport and Unpacking
3BFP 000 050 R0101 REV E
Table 2-3. Tightening torque (lubricated screw). Axially locating bearing carries the locking
force
2.6.5 Openings
If there are any openings where cables are not connected to terminal boxes or flanges that are
not connected to the piping, they are to be sealed. The coolers and the piping within the machine
are to be cleaned and dried before they are sealed. The drying is made by blowing warm and dry
air through the pipes.
2.7 Inspections, records
The storage period, taken precautions and measurements, including dates, should be recorded.
For relevant check-lists, see Appendix COMMISSIONING REPORT.
Axially locating bearing
type
Tightening torque [Nm] Tightening torque
[pound foot]
ZM_LB 7 100 74
EF_LB 9 250 180
EF_LB 11 300 220
EF_LB 14 600 440
EM_LB 14 600 440
EF_LB 18 900 670
To Next Page
Loading...
Need help?
General
