To Next Page

To Previous Page

1 Reference information

1.7. Standard toolkit

3HAC023297-001 Revision: A20

1.7. Standard toolkit

General

All service (repair, maintenance and installation) instructions contain lists of tools required

to perform the specified activity. All special tools, i.e. all tools that are not considered

standard as defined below, are listed in their instructions respectively.

This way, the tools required are the sum of the Standard Toolkit and any tools listed in the

instruction.

Contents

Standard tool, IRB 140: 3HAC020812-001 contains:

Qty Art. no. Tool

1 - Ring-open-end spanner 8-19mm

1 - Socket head cap 2,5-17mm

1 - Torx socket no:20-60

1 - Torque wrench 10-100Nm

1 - Small screwdriver

1 - Ratchet head for torque wrench 1/2

1 - Socket head cap no:5, socket 1/2"" bit L 20mm

1 - Socket head cap no:6, socket 1/2"" bit L 20mm

1 - Socket head cap no:8, socket 1/2"" bit L 20mm

1 - Small cutting plier

ABB M2004 Reference Manual

Other manuals for ABB M2004