ABB PSE 85 User Manual

Softstarters Type PSE18...PSE370 Installation and commissioning manual 1SFC132057M020110 Chapter 1
1.2.3 Acronyms and abbreviations
The acronyms and abbreviations described in table 1.1 are used in this manual.
Table 1.1
Acronym/ abbre-
viation
Description
BP By-pass
DOL Direct-on-line
EOL Electronic overload protection for the Motor
FB Fieldbus
FBP FieldBusPlug
HMI Human-Machine Interface
I
e
Rated operational current
IT Information Technology
LCD Liquid Crystal Display
LED Light Emitting Diode
PCB Printed Circuit Board
PLC Programmable Logic Controller
PTC Positive Temperature Coefcient
SC Short Circuit
SCR Silicon Controlled Rectier (thyristor)
TOR Top of Ramp (full voltage/Full-On)
U
c
Rated control circuit voltage *
U
e
Rated operational voltage *
U
s
Rated control supply voltage *
*) For denition see IEC 60947-1 edition 5.0
1.2.4 Explanation of concepts
The setting of current I
e
is the setting for the rated operational current (main cur-
rent) of the motor.
U
e
= Rated operational voltage on the motor’s operational current (three phase
main voltage feeding the motor).
U
s
= Rated control supply voltage, feeding the electronics in the softstarter.
U
c
= Rated control voltage, used for controlling the softstarter.

ABB PSE 85 Specifications

General

Brand	ABB
Model	PSE 85
Category	Controller
Language	English