ABB RHDE250 User Manual

Safety
42/68-167-EN RHDE250 ... 4000 (Contrac) 7
Pos: 4.11 /Überschri ften/1.1.1/1-spal tig/Typenschild @ 0\mod_1140617210906_3 101.doc @ 3227
1.4.2 Name plate
Pos: 4.12 /Sicher heit/Aktorik/Allge mein/Typenschild @ 9\ mod_1181413766031_3101. doc @ 102757
M00305
Antrieb / Actu ator: CONTRAC ....
F-Nr./No NL
M = Jahr/Year
CE
t= IP66
min......max. ....... max. .........
Öl / Oil:
Mit / With Elektronik/Electronics EBN ../EBS...
II 2 G/D ck EEx de [ib] ib II B T4 bzw IP6x T=130°C
ZELM 04 ATEX 0209 X
ABB Automation
D-32425 Minden
Made in Germany
1
2
3
4
5
6
7
8
9
10
XXXX
Fig. 1
1 Complete model name
2 Fabrication no./ NL no. (no. of non-
standard version)
3 Output torque / Year of manufacture
4 Permissible ambient temperature and
protection class / CE mark with
information about the monitoring
authority
5 min./max. crank angle and min./max.
actuating speed
6 Filled oil types
7 Associated Contrac electronic unit
8 Explosion protection class
9 Certification authority
10 Free for customer-specific entry
Pos: 4.13 /Sicher heit/Aktorik/Allge mein/Pflichten des Be treibers @ 10\mod_118172 3170562_3101.doc @ 105157
1.5 Operator liability
The operators must strictly observe the applicable national regulations in their countries with
regards to installation, function tests, repairs, and maintenance of electrical devices.
Pos: 4.14 /Sicher heit/Allgemein/Organis atorische Maßnah men/Qualifikation des Per sonals @ 0\mod_1129728 800194_3101.doc @ 3247
1.6 Personnel qualification
The installation, commissioning and maintenance of the device may only be carried out through
trained specialist personell authorized by the plant operator. The specialist personnel must have
read and understood the manual and comply with its instructions.
Pos: 4.15 /====== = Seitenumbruch ======= = @ 0\mod_1126532365768_3101.doc @ 3830

ABB RHDE250 Specifications

General

Brand	ABB
Model	RHDE250
Category	Controller
Language	English