Introduction
11
Introduction
Intended audience
The manual is intended for the people who are responsible for
commissioning and using an RPBA-01 PROFIBUS DP Adapter
module. The reader is expected to have a basic knowledge of
electrical fundamentals, electrical wiring practices and how to
operate the drive.
Before you start
It is assumed that the drive is installed and ready to operate before
starting the installation of the extension module.
In addition to conventional installation tools, have the drive
manuals available during the installation as they contain important
information not included in this manual. The drive manuals are
referred to at various points of this document.
What this manual contains
This manual contains information on the wiring, configuration and
use of the RPBA-01 PROFIBUS DP Adapter module.
Safety instructions are featured in the first few pages of this
manual.
Overview contains a short description of the PROFIBUS protocol
and the RPBA-01 PROFIBUS DP Adapter module, a delivery
checklist, and information on the manufacturer’s warranty.
Quick start-up guide contains a short description of how to set
up the RPBA-01 PROFIBUS DP Adapter module.
Mechanical installation contains placing and mounting
instructions for the module.
Electrical installation contains wiring, bus termination and
earthing instructions.
To Next Page
Loading...
Need help?
General
