ABB S500 User Manual

____________________________________________________________________________________________________________
V2 S500 Hardware 1-5 System Data S500 / Issued: 01.2007
Diagnosis LEDs
All S500 modules have LEDs for the display of operating statuses and error messages. They indicate:
LED Status Color LED = ON LED = OFF LED flashes
digital input yellow input = ON input = OFF -- Input
analog input yellow brightness depends on the value of the
analog signal
--
digital output yellow output = ON output = OFF -- Output
analog output yellow brightness depends on the value of the
analog signal
--
UP process
voltage 24 V
DC via
terminal
green voltage is present voltage is missing --
PWR supply voltage
24 V DC via
FBP
green voltage is present voltage is missing --
S-ERR Sum Error red serious error, data
exchange is
stopped, depends
on the behaviour of
the master
no error error (e.g. error
on one
channel, data
exchange is not
stopped
FBP FBP
communication
green communication
between FBP and
FBP Interface
Module is running
communication
between FBP and
FBP Interface
Module is broken
during
initialization
I/O-Bus I/O-Bus
communication
green communication
between FBP
Interface Module
and the I/O
modules is running
no communication
between FBP
Interface Module
and the I/O
modules
error on one I/O
expansion
module (e.g.
one output
short-circuited)
CH-ERR1 red
CH-ERR2 red
CH-ERR3 red
CH-ERR4
Channel Error,
error
messages in
groups (digital
or analog
inputs and
outputs
combined into
the groups 1,
2, 3, 4)
red
serious error within
the corresponding
group
no error error on one
channel of the
corresponding
group (e.g. one
output short-
circuited)
CH-ERR
*)
Module Error red error within the I/O
module
-- --
*) All of the LEDs CH-ERR1 to CH-ERR4 (as far as they exist) light up together

ABB S500 Specifications

General

Brand	ABB
Model	S500
Category	I/O Systems
Language	English